Datasheet4U Logo Datasheet4U.com

IR3527 - Dual Phase

General Description

The IR3527 Dual Phase IC combined with an IR XPhase3 Control IC provides a full featured and flexible way to implement multiphase power solutions.

Key Features

  • x x x x x x x x x x x x 7V/1.3A gate drivers (2.6A GATEL sink current) Converter output voltage up to 5.1 V (Limited to VCCL-1.4V) Loss-less inductor current sensing Feed-forward voltage mode control Integrated boot-strap synchronous PFET Self-calibration of PWM ramp, current sense amplifier, and current share amplifier Single-wire bidirectional average current sharing Only three external components per phase, plus common decoupling capacitors Power State Indicator (PSI) interface provides the c.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IR35215 dual output digital multi-phase controller Infineon
IR350 Receiver Pre-amp Module ETC
IR300N-D0 Infrared Emitter CT Micro
IR304C-AXXXX Infrared LED Lamp Xinqiao Optoelectronic
IR311 REFLECTIVE NON FOCUSING SENSOR Fairchild Semiconductor

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR35201 8+0/7+1/6+2 Dual Output Digital Multi-Phase Controller
IR35203 6+1 Dual Output Digital Multi-Phase Controller
IR35204 3+1 Dual Output Digital Multi-Phase Controller
IR3521 XPHASE3 AMD SVID CONTROLLER
IR35211 Dual Output Digital Multi-Phase Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IR3527 DATA SHEET XPHASE3TM DUAL PHASE IC DESCRIPTION The IR3527 Dual Phase IC combined with an IR XPhase3 Control IC provides a full featured and flexible way to implement multiphase power solutions. The Control IC provides overall system control and interfaces with any number of IR3527 Phase ICs which each drive and monitor 2 phases of a Synchronous Buck converter. The IR3527 implement an independent power savings function for each power stage and sequential phase timing for use in single output multiphase converters. When power saving mode is enabled, the power stage will disable its output thus eliminating its switching loss while proper converter operation is maintained by the single power stage or in conjunction with other converter power stages.